NAVRACHANA UNIVERSITY

Browsing Journal Papers by Title

Browsing Journal Papers by Title

Sort by: Order: Results:

  • Accurate numerical modeling for functionally graded (FG) cylinders of finite length subjected to thermo mechanical load 
    Desai, Payal; Kant, Tarun (2011)
    A simplified and accurate analytical cum numerical model is presented here to investigate the behavior of FG cylinders of finite length subjected to thermo mechanical load. A diaphragm supported FG cylinder under symmetric ...
  • Analytical comparison of a gas turbine blade cooling using wet and dry air 
    Patel, Snehal N.; Patel, Dilip S.; Pathak, Kedar A. (CAS (division of the American Chemical Society (ACS)), Index Copernicus, 2016)
    Air cooling is widely used technique to shield the turbine aerofoils against hot flue gases. The cooling of a gas turbine blade using wet air and dry air as a coolant is analytically investigated. The investigation is ...
  • Application of soft computing techniques to predict reservoir water level 
    Shinglot, Vrushaly K.; Tiwari, Monika R.; Bhatt, Shardav U.; Shrimali, Narendra J. (Blue Eyes Intelligence Engineering & Sciences Publication Pvt. Ltd., 2016-07)
    In this work, the reservoir water level has been predicted using one of the soft computing techniques named Artificial Neural Network. The reservoir water level is influenced by many parameters. Among which the most ...
  • Authorized data availability with secure deduplication framework using hybrid cloud 
    Sajjan, Rajani; Chavan, Gayatri; Ghorpade, Vijay (International Journal of Advanced Research in Computer and Communication Engineering, 2016-05)
    Since the demand for data storage is increasing day by day and by the industry analysis we can say that digital data is increasing gradually, but the storage of redundant data is excess which results in most of the storage ...
  • Authorized data availability with secure deduplication framework using hybrid cloud 
    Sajjan, Rajani; Chavan, Gayatri; Ghorpade, Vijay (International Journal of Advanced Research in Computer and Communication Engineering, 2016-05)
    Since the demand for data storage is increasing day by day and by the industry analysis we can say that digital data is increasing gradually, but the storage of redundant data is excess which results in most of the storage ...
  • Baffle technique to avoid vampire attacks using route tracking in wireless ad hoc network 
    THAKUR, SUSHMA N.; RASKAR, SANDEEP (International Journal of Advances in Electronics and Computer Science, 2015-07)
    - The Ad hoc wireless network contains a number of small wireless devices which has the wireless communication capability, signal processing intelligence and transferring of the data. Communications are vulnerable to ...
  • Behaviour of NTE material ag3[Co(CN)6] under pressure 
    Ghalsasi, Pallavi; Poswal, H. K.; Tripathi, Ravi; Garg, Nandini; Deo, M.N.; Sharma, Surinder M. (IOP Publishing, 2012)
    Recent discovery of colossal negative thermal expansion (NTE) behaviour in Silver Hexacyanocobaltate Ag3[Co(CN)6] has triggered interest among researchers to understand the basic mechanism causing such an unusual behaviour. ...
  • Contingency analysis in power system and remedial actions 
    Patel, Niraj H.; Thakkar, Vishal; Raval, Hemant N. (International Journal for Scientific Research & Development - IJSRD, 2015)
    For practical system operation, apart from ensuring the satisfactory operation of the system at a particular operating condition, it is also equally important to make sure that the system operates with adequate level of ...
  • Detection of defects in bridges using joint shear wave technique: A laboratory study for structural health monitoring 
    Desai, Payal; Grace, N. (The Indian Concrete Journal, 2012-02)
    This paper reports on a study carried out regarding the performance of bridges. The applicability of a nondestructive testing instrument called MIRA which uses the powerful joint shear wave principle is demonstrated by ...
  • Dynamic behavior and characteristic failure response of low plasticity cohesive soil 
    Thakur, Adarsh Singh; Pandya, Saloni; Sachan, Ajanta (Springer, 2020-08)
    The present study evaluates the effect of stress history and loading conditions on dynamic behavior and failure characteristics of low plasticity cohesive soil. A series of two-way strain controlled cyclic triaxial tests ...
  • Effects of gust load on tall buildings 
    Patel, Divya; Shah, Rahul (Journal of Emerging Technologies and Innovative Research (JETIR, 2019-05)
    With the rapid growth in building construction and urbanization in India, buildings are getting taller than ever. As the height of building increases it becomes more flexible. The structure of high-rise buildings is usually ...
  • Efficient key generation algorithm in PDP (Provable Data Posesion) 
    PATNI, KINJAL (International Journal of Innovative and Emerging Research in Engineering, 2017)
    Recently, data outsourcing is in trend because of high data generation growth. People are using Remote Data Storage System to use their data remotely anywhere any time via internet. While accessing data via internet ...
  • Experimental investigation of flat plate cryogenic oscillating heat pipe 
    Patel, Vivek; Mehta, Nirvesh; Mehta, Kamlesh; Badgujar, Amarish; Mehta, Shreya; Bora, Nisha (Springer Science+Business Media, 2019)
    Recent developments in applications such as high-temperature superconducting magnets, infrared detectors, and electronics components have led to an alarming increase in heat dissipation rate, which now far exceeds the ...
  • Fabrication and characterization of heat pipe with composite structure for the adiabatic section 
    Parikh, Hiral; Pathak, Kedar (Current Materials Science, 2020)
    Background: Innovative cooling technology is required in every field of life, ranging from satellite to terrestrial applications. A novel heat rejection system is of great concern for space applications. Futuristic ...
  • First and second-order optimality conditions for unconstrained L-fuzzy optimization problems 
    Pirzada, U. M.; Pathak, V. D. (2011)
    Based on the concept of parametric total order relation on L-fuzzy numbers defined by S. Saito and H. Ishi [9], this paper establishes the first and second order necessary and sufficient optimality conditions for ...
  • High-temperature, polymer graphite hybrid composites for bipolar plates: Effect of processing conditions on electrical properties 
    S., Radhakrishnan; B. T. S, Ramanujam; Adhikari, A.; Sivaram, S. (Elsevier B.V., 2006)
    High-temperature thermoplastic graphite composites are prepared using polyphenylene sulfide (PPS) and polyether sulfone (PES) containing natural graphite powder. All samples are prepared by high pressure compaction and ...
  • Impact of Slab Thickness on Reinforced Concrete Buildings using Fragility Curves 
    Nirav K. Patel, Nirav K.; Vasanwala, Sandip A. (2020-01)
    Earthquakes are the natural disaster occurring since years but during the last two decades they are causing huge looses whether it may economic or to life. This paper focuses to evaluate the seismic performance of various ...
  • Inverse method for function estimation in turbulent dphe flow 
    Patel, Shailesh K.; Patel, Dilip S.; Pathak, Kedar A. (INTERNATIONAL JOURNAL OF RESEARCH IN ELECTRONICS AND COMPUTER ENGINEERING, 2018-09)
    The article investigates the applicability of inverse methods in estimating the best values to be assigned to certain parameters which appear in turbulent flow through DPHE. The normalized study domain has been derived ...
  • Investigation of heat transfer in concentric annuli with perforated inserts 
    Patel, Shailesh; Patel, Dilip S.; Pathak, Kedar A. (CAS (division of the American Chemical Society (ACS)), Index Copernicus, 2018)
    The increasing necessity for saving energy and material imposed by the diminishing world resources and environmental concerns have prompted the development of more effective heat-transfer equipment with improved heat-transfer ...
  • Joining of metal matrix composites using friction stir welding: a review 
    Parikh, V. K.; Badgujar, A.D.; Ghetiya, N.D. (Tyalor & Francis, 2019-09)
    The application of fusion welding process is restricted to certain grades of alloys and materials. Solid-state joining process offers greater advantages over fusion welding process such as fumeless and effective joining, ...

Search NUV Repository


Advanced Search

Browse

My Account